Added DHT22 sensor code

If DHT22 humidity sensor is connected, temp and hum is displayed.

operame.ino

@@ -9,8 +9,18 @@
 #include <logo.h>
 #include <list>
 #include <operame_strings.h>
+#include <Adafruit_Sensor.h>
+#include <DHT.h>
+//#include <DHT_U.h>
 
 #define LANGUAGE "nl"
+
+#define DHTPIN 15    // Digital pin connected to the DHT sensor
+// Uncomment the type of sensor in use:
+//#define DHTTYPE    DHT11     // DHT 11
+#define DHTTYPE    DHT22     // DHT 22 (AM2302)
+//#define DHTTYPE    DHT21     // DHT 21 (AM2301)
+
 OperameLanguage::Texts T;
 
 enum Driver { AQC, MHZ };
@@ -20,6 +30,7 @@ HardwareSerial  hwserial1(1);
 TFT_eSPI        display;
 TFT_eSprite     sprite(&display);
 MHZ19           mhz;
+DHT             dht(DHTPIN, DHTTYPE);
 
 const int       pin_portalbutton = 35;
 const int       pin_demobutton   = 0;
@@ -70,6 +81,21 @@ void display_big(const String& text, int fg = TFT_WHITE, int bg = TFT_BLACK) {
 
     sprite.pushSprite(0, 0);
 }
+void display_3(const String& co2, const String& temp, const String& hum, int fg = TFT_WHITE, int bg = TFT_BLACK) {
+    clear_sprite(bg);
+    sprite.setTextSize(1);
+    sprite.setTextFont(8);
+    sprite.setTextDatum(MC_DATUM);
+    sprite.setTextColor(fg, bg);
+    sprite.drawString(co2, display.width()/2, display.height()/2 - 25);
+    sprite.setTextFont(4);
+    sprite.setTextDatum(ML_DATUM);
+    sprite.drawString(temp, 10, display.height() - 15);
+    sprite.setTextDatum(MR_DATUM);
+    sprite.drawString(hum, display.width() - 10, display.height() - 15);
+
+    sprite.pushSprite(0, 0);
+}
 
 void display_lines(const std::list<String>& lines, int fg = TFT_WHITE, int bg = TFT_BLACK) {
     clear_sprite(bg);
@@ -113,6 +139,26 @@ void display_ppm(int ppm) {
     display_big(String(ppm), fg, bg);
 }
 
+void display_ppm_t_h(int ppm, float t, float h) {
+    int fg, bg;
+    if (ppm >= co2_critical) {
+        fg = TFT_WHITE;
+        bg = TFT_RED;
+    } else if (ppm >= co2_warning) {
+        fg = TFT_BLACK;
+        bg = TFT_YELLOW;
+    } else {
+        fg = TFT_GREEN;
+        bg = TFT_BLACK;
+    }
+
+    if (ppm >= co2_blink && millis() % 2000 < 1000) {
+        std::swap(fg, bg);
+    }
+
+    display_3(String(ppm), String(t), String(h), fg, bg);
+}
+
 void calibrate() {
     auto lines = T.calibration;
     for (int count = 60; count >= 0; count--) {
@@ -369,6 +415,8 @@ void setup() {
         Serial.println("Using MHZ driver.");
     }
 
+    // Initialize DHT device.
+    dht.begin();
     
     for (auto& str : T.portal_instructions[0]) {
         str.replace("{ssid}", WiFiSettings.hostname);
@@ -439,10 +487,20 @@ void setup() {
 
 void loop() {
     static int co2;
+    static float h;
+    static float t;
 
     every(5000) {
+        // Read CO2, humidity and temperature 
         co2 = get_co2();
+        h = dht.readHumidity();
+        t = dht.readTemperature();
+        // Print data to serial port
         Serial.print(co2);
+        Serial.print(",");
+        Serial.print(t);
+        Serial.print(",");
+        Serial.print(h);
         Serial.println();
     }
 
@@ -452,8 +510,16 @@ void loop() {
         } else if (co2 == 0) {
             display_big(T.wait);
         } else {
-            // some MH-Z19's go to 10000 but the display has space for 4 digits
+            // Check if there is a humidity sensor
-            display_ppm(co2 > 9999 ? 9999 : co2);
+            if (isnan(h) || isnan(t)) {
+                Serial.println("Failed to read from DHT sensor!");
+                // Only display CO2 value (the old way)
+                // some MH-Z19's go to 10000 but the display has space for 4 digits
+                display_ppm(co2 > 9999 ? 9999 : co2);
+            } else {
+                // Display also humidity and temperature
+                display_ppm_t_h(co2 > 9999 ? 9999 : co2, t, h);
+            }
         }
     }
 

platformio.ini

@@ -6,7 +6,7 @@
 ;   Advanced options: extra scripting
 ;
 ; Please visit documentation for the other options and examples
-; http://docs.platformio.org/page/projectconf.html
+; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
 src_dir = .
@@ -21,51 +21,42 @@ framework = arduino
 targets = upload
 monitor_speed = 115200
 lib_deps = 
-    ESP-WiFiSettings@^3.7.2
+	ESP-WiFiSettings@^3.7.2
-    MH-Z19
+	MH-Z19
-    TFT_eSPI
+	TFT_eSPI
-    MQTT
+	MQTT
-
 build_flags = 
-# ESP-WiFiSettings languages:
+	-DLANGUAGE_EN
-  -DLANGUAGE_EN
+	-DLANGUAGE_NL
-  -DLANGUAGE_NL
+	-DUSER_SETUP_LOADED=1
-# ESP32 debugging:
+	-DST7789_DRIVER=1
-#  -DCORE_DEBUG_LEVEL=5
+	-DCGRAM_OFFSET=1
-# TFT_eSPI configuration:
+	-DTFT_WIDTH=135
-  -DUSER_SETUP_LOADED=1
+	-DTFT_HEIGHT=240
-  -DST7789_DRIVER=1
+	-DTFT_MOSI=19
-  -DCGRAM_OFFSET=1
+	-DTFT_SCLK=18
-  -DTFT_WIDTH=135
+	-DTFT_CS=5
-  -DTFT_HEIGHT=240
+	-DTFT_DC=16
-  -DTFT_MOSI=19
+	-DTFT_RST=-23
-  -DTFT_SCLK=18
+	-DTFT_BL=4
-  -DTFT_CS=5
+	-DTFT_BACKLIGHT_ON=HIGH
-  -DTFT_DC=16
+	-DLOAD_GLCD=1
-  -DTFT_RST=-23
+	-DLOAD_FONT2=1
-  -DTFT_BL=4
+	-DLOAD_FONT4=1
-  -DTFT_BACKLIGHT_ON=HIGH
+	-DLOAD_FONT6=1
-  -DLOAD_GLCD=1
+	-DLOAD_FONT7=1
-  -DLOAD_FONT2=1
+	-DLOAD_FONT8=1
-  -DLOAD_FONT4=1
+	-DLOAD_GFXFF=1
-  -DLOAD_FONT6=1
+	-DSPI_FREQUENCY=40000000
-  -DLOAD_FONT7=1
-  -DLOAD_FONT8=1
-  -DLOAD_GFXFF=1
-  -DSPI_FREQUENCY=40000000
 
 [env:serial]
 upload_protocol = esptool
+lib_deps = adafruit/DHT sensor library@^1.4.2
 
 [env:ota]
 upload_protocol = espota
 upload_port = operame-HEX_HERE.local
 upload_flags = 
-    --port=3232
+	--port=3232
-    --auth=PASSWORD_HERE
+	--auth=PASSWORD_HERE
-; Alternatively, instead of editing this file (which is annoying because it
+lib_deps = adafruit/DHT sensor library@^1.4.2
-; might end up being committed in git), you can create extra an extra config
-; file.
-; Just copy the [env:ota] section to a new file called platformio-NAME.ini
-; and change [env:ota] to [env:NAME]. You can use this to OTA-update multiple
-; Operames with a single command: pio run -t upload -e NAME -e NAME -e NAME