mirror of
https://github.com/revspace/operame
synced 2024-11-01 05:57:30 +00:00
540 lines
15 KiB
C++
540 lines
15 KiB
C++
#include <WiFi.h>
|
|
#include <MQTT.h>
|
|
#include <SPIFFS.h>
|
|
#include <WiFiSettings.h>
|
|
#include <MHZ19.h>
|
|
#include <ArduinoOTA.h>
|
|
#include <SPI.h>
|
|
#include <TFT_eSPI.h>
|
|
#include <logo.h>
|
|
#include <list>
|
|
#include <operame_strings.h>
|
|
#include <Adafruit_Sensor.h>
|
|
#include <DHT.h>
|
|
//#include <DHT_U.h>
|
|
|
|
#define LANGUAGE "nl"
|
|
|
|
#define DHTPIN 15 // Digital pin connected to the DHT sensor
|
|
// Uncomment the type of sensor in use:
|
|
//#define DHTTYPE DHT11 // DHT 11
|
|
#define DHTTYPE DHT22 // DHT 22 (AM2302)
|
|
//#define DHTTYPE DHT21 // DHT 21 (AM2301)
|
|
|
|
OperameLanguage::Texts T;
|
|
|
|
enum Driver { AQC, MHZ };
|
|
Driver driver;
|
|
MQTTClient mqtt;
|
|
HardwareSerial hwserial1(1);
|
|
TFT_eSPI display;
|
|
TFT_eSprite sprite(&display);
|
|
MHZ19 mhz;
|
|
DHT dht(DHTPIN, DHTTYPE);
|
|
|
|
const int pin_portalbutton = 35;
|
|
const int pin_demobutton = 0;
|
|
const int pin_backlight = 4;
|
|
const int pin_sensor_rx = 27;
|
|
const int pin_sensor_tx = 26;
|
|
const int pin_pcb_ok = 12; // pulled to GND by PCB trace
|
|
int mhz_co2_init = 410; // magic value reported during init
|
|
|
|
// Configuration via WiFiSettings
|
|
unsigned long mqtt_interval;
|
|
bool ota_enabled;
|
|
int co2_warning;
|
|
int co2_critical;
|
|
int co2_blink;
|
|
String mqtt_topic;
|
|
String mqtt_template;
|
|
bool add_units;
|
|
bool wifi_enabled;
|
|
bool mqtt_enabled;
|
|
int max_failures;
|
|
|
|
void retain(const String& topic, const String& message) {
|
|
Serial.printf("%s %s\n", topic.c_str(), message.c_str());
|
|
mqtt.publish(topic, message, true, 0);
|
|
}
|
|
|
|
void clear_sprite(int bg = TFT_BLACK) {
|
|
sprite.fillSprite(bg);
|
|
if (WiFi.status() == WL_CONNECTED) {
|
|
sprite.drawRect(0, 0, display.width(), display.height(), TFT_BLUE);
|
|
}
|
|
}
|
|
|
|
void display_big(const String& text, int fg = TFT_WHITE, int bg = TFT_BLACK) {
|
|
clear_sprite(bg);
|
|
sprite.setTextSize(1);
|
|
bool nondigits = false;
|
|
for (int i = 0; i < text.length(); i++) {
|
|
char c = text.charAt(i);
|
|
if (c < '0' || c > '9') nondigits = true;
|
|
}
|
|
sprite.setTextFont(nondigits ? 4 : 8);
|
|
sprite.setTextSize(nondigits && text.length() < 10 ? 2 : 1);
|
|
sprite.setTextDatum(MC_DATUM);
|
|
sprite.setTextColor(fg, bg);
|
|
sprite.drawString(text, display.width()/2, display.height()/2);
|
|
|
|
sprite.pushSprite(0, 0);
|
|
}
|
|
void display_3(const String& co2, const String& temp, const String& hum, int fg = TFT_WHITE, int bg = TFT_BLACK) {
|
|
clear_sprite(bg);
|
|
sprite.setTextSize(1);
|
|
sprite.setTextFont(8);
|
|
sprite.setTextDatum(MC_DATUM);
|
|
sprite.setTextColor(fg, bg);
|
|
sprite.drawString(co2, display.width()/2, display.height()/2 - 25);
|
|
sprite.setTextFont(4);
|
|
sprite.setTextDatum(ML_DATUM);
|
|
sprite.drawString(temp, 10, display.height() - 15);
|
|
sprite.setTextDatum(MR_DATUM);
|
|
sprite.drawString(hum, display.width() - 10, display.height() - 15);
|
|
|
|
sprite.pushSprite(0, 0);
|
|
}
|
|
|
|
void display_lines(const std::list<String>& lines, int fg = TFT_WHITE, int bg = TFT_BLACK) {
|
|
clear_sprite(bg);
|
|
sprite.setTextSize(1);
|
|
sprite.setTextFont(4);
|
|
sprite.setTextDatum(MC_DATUM);
|
|
sprite.setTextColor(fg, bg);
|
|
|
|
const int line_height = 32;
|
|
int y = display.height()/2 - (lines.size()-1) * line_height/2;
|
|
for (auto line : lines) {
|
|
sprite.drawString(line, display.width()/2, y);
|
|
y += line_height;
|
|
}
|
|
sprite.pushSprite(0, 0);
|
|
}
|
|
|
|
void display_logo() {
|
|
clear_sprite();
|
|
sprite.setSwapBytes(true);
|
|
sprite.pushImage(0, 0, 240, 135, CONTROL_CO2_V2_240_135_LOGO);
|
|
sprite.pushSprite(0, 0);
|
|
}
|
|
|
|
void display_ppm(int ppm) {
|
|
int fg, bg;
|
|
if (ppm >= co2_critical) {
|
|
fg = TFT_WHITE;
|
|
bg = TFT_RED;
|
|
} else if (ppm >= co2_warning) {
|
|
fg = TFT_BLACK;
|
|
bg = TFT_YELLOW;
|
|
} else {
|
|
fg = TFT_GREEN;
|
|
bg = TFT_BLACK;
|
|
}
|
|
|
|
if (ppm >= co2_blink && millis() % 2000 < 1000) {
|
|
std::swap(fg, bg);
|
|
}
|
|
display_big(String(ppm), fg, bg);
|
|
}
|
|
|
|
void display_ppm_t_h(int ppm, float t, float h) {
|
|
int fg, bg;
|
|
if (ppm >= co2_critical) {
|
|
fg = TFT_WHITE;
|
|
bg = TFT_RED;
|
|
} else if (ppm >= co2_warning) {
|
|
fg = TFT_BLACK;
|
|
bg = TFT_YELLOW;
|
|
} else {
|
|
fg = TFT_GREEN;
|
|
bg = TFT_BLACK;
|
|
}
|
|
|
|
if (ppm >= co2_blink && millis() % 2000 < 1000) {
|
|
std::swap(fg, bg);
|
|
}
|
|
|
|
display_3(String(ppm), String(t), String(h), fg, bg);
|
|
}
|
|
|
|
void calibrate() {
|
|
auto lines = T.calibration;
|
|
for (int count = 60; count >= 0; count--) {
|
|
lines.back() = String(count);
|
|
display_lines(lines, TFT_RED);
|
|
unsigned long start = millis();
|
|
while (millis() - start < 1000) {
|
|
if (button(pin_demobutton) || button(pin_portalbutton)) return;
|
|
}
|
|
}
|
|
|
|
lines = T.calibrating;
|
|
if (driver == AQC) for (auto& line : lines) line.replace("400", "425");
|
|
display_lines(lines, TFT_MAGENTA);
|
|
|
|
set_zero(); // actually instantaneous
|
|
delay(15000); // give time to read long message
|
|
}
|
|
|
|
void ppm_demo() {
|
|
display_big("demo!");
|
|
delay(3000);
|
|
display_logo();
|
|
delay(1000);
|
|
int buttoncounter = 0;
|
|
for (int p = 400; p < 1200; p++) {
|
|
display_ppm(p);
|
|
if (button(pin_demobutton)) {
|
|
display_logo();
|
|
delay(500);
|
|
return;
|
|
}
|
|
|
|
// Hold portal button from 700 to 800 for manual calibration
|
|
if (p >= 700 && p < 800 && !digitalRead(pin_portalbutton)) {
|
|
buttoncounter++;
|
|
}
|
|
if (p == 800 && buttoncounter >= 85) {
|
|
while (!digitalRead(pin_portalbutton)) delay(100);
|
|
calibrate();
|
|
display_logo();
|
|
delay(500);
|
|
return;
|
|
}
|
|
delay(30);
|
|
}
|
|
display_logo();
|
|
delay(5000);
|
|
}
|
|
|
|
void panic(const String& message) {
|
|
display_big(message, TFT_RED);
|
|
delay(5000);
|
|
ESP.restart();
|
|
}
|
|
|
|
bool button(int pin) {
|
|
if (digitalRead(pin)) return false;
|
|
unsigned long start = millis();
|
|
while (!digitalRead(pin)) {
|
|
if (millis() - start >= 50) display_big("");
|
|
}
|
|
return millis() - start >= 50;
|
|
}
|
|
|
|
void check_portalbutton() {
|
|
if (button(pin_portalbutton)) WiFiSettings.portal();
|
|
}
|
|
|
|
void check_demobutton() {
|
|
if (button(pin_demobutton)) ppm_demo();
|
|
}
|
|
|
|
void check_buttons() {
|
|
check_portalbutton();
|
|
check_demobutton();
|
|
}
|
|
|
|
void setup_ota() {
|
|
ArduinoOTA.setHostname(WiFiSettings.hostname.c_str());
|
|
ArduinoOTA.setPassword(WiFiSettings.password.c_str());
|
|
ArduinoOTA.onStart( []() { display_big("OTA", TFT_BLUE); });
|
|
ArduinoOTA.onEnd( []() { display_big("OTA done", TFT_GREEN); });
|
|
ArduinoOTA.onError( [](ota_error_t e) { display_big("OTA failed", TFT_RED); });
|
|
ArduinoOTA.onProgress([](unsigned int p, unsigned int t) {
|
|
String pct { (int) ((float) p / t * 100) };
|
|
display_big(pct + "%");
|
|
});
|
|
ArduinoOTA.begin();
|
|
}
|
|
|
|
void connect_mqtt() {
|
|
if (mqtt.connected()) return; // already/still connected
|
|
|
|
static int failures = 0;
|
|
if (mqtt.connect(WiFiSettings.hostname.c_str())) {
|
|
failures = 0;
|
|
} else {
|
|
failures++;
|
|
if (failures >= max_failures) panic(T.error_mqtt);
|
|
}
|
|
}
|
|
|
|
void flush(Stream& s, int limit = 20) {
|
|
// .available() sometimes stays true (why?), hence the limit
|
|
|
|
s.flush(); // flush output
|
|
while(s.available() && --limit) s.read(); // flush input
|
|
}
|
|
|
|
int aqc_get_co2() {
|
|
static bool initialized = false;
|
|
|
|
const uint8_t command[9] = { 0xff, 0x01, 0xc5, 0, 0, 0, 0, 0, 0x3a };
|
|
uint8_t response[9];
|
|
int co2 = -1;
|
|
|
|
for (int attempt = 0; attempt < 3; attempt++) {
|
|
flush(hwserial1);
|
|
hwserial1.write(command, sizeof(command));
|
|
delay(50);
|
|
|
|
size_t c = hwserial1.readBytes(response, sizeof(response));
|
|
if (c != sizeof(response) || response[0] != 0xff || response[1] != 0x86) {
|
|
continue;
|
|
}
|
|
uint8_t checksum = 255;
|
|
for (int i = 0; i < sizeof(response) - 1; i++) {
|
|
checksum -= response[i];
|
|
}
|
|
if (response[8] == checksum) {
|
|
co2 = response[2] * 256 + response[3];
|
|
break;
|
|
}
|
|
delay(50);
|
|
}
|
|
|
|
if (co2 < 0) {
|
|
initialized = false;
|
|
return co2;
|
|
}
|
|
|
|
if (!initialized && (co2 == 9999 || co2 == 400)) return 0;
|
|
initialized = true;
|
|
return co2;
|
|
}
|
|
|
|
void aqc_set_zero() {
|
|
const uint8_t command[9] = { 0xff, 0x01, 0x87, 0, 0, 0, 0, 0, 0x78 };
|
|
flush(hwserial1);
|
|
hwserial1.write(command, sizeof(command));
|
|
}
|
|
|
|
void mhz_setup() {
|
|
mhz.begin(hwserial1);
|
|
// mhz.setFilter(true, true); Library filter doesn't handle 0436
|
|
mhz.autoCalibration(true);
|
|
char v[5] = {};
|
|
mhz.getVersion(v);
|
|
v[4] = '\0';
|
|
if (strcmp("0436", v) == 0) mhz_co2_init = 436;
|
|
}
|
|
|
|
int mhz_get_co2() {
|
|
int co2 = mhz.getCO2();
|
|
int unclamped = mhz.getCO2(false);
|
|
|
|
if (mhz.errorCode != RESULT_OK) {
|
|
delay(500);
|
|
mhz_setup();
|
|
return -1;
|
|
}
|
|
|
|
// reimplement filter from library, but also checking for 436 because our
|
|
// sensors (firmware 0436, coincidence?) return that instead of 410...
|
|
if (unclamped == mhz_co2_init && co2 - unclamped >= 10) return 0;
|
|
|
|
// No known sensors support >10k PPM (library filter tests for >32767)
|
|
if (co2 > 10000 || unclamped > 10000) return 0;
|
|
|
|
return co2;
|
|
}
|
|
|
|
void mhz_set_zero() {
|
|
mhz.calibrate();
|
|
}
|
|
|
|
int get_co2() {
|
|
// <0 means read error, 0 means still initializing, >0 is PPM value
|
|
|
|
if (driver == AQC) return aqc_get_co2();
|
|
if (driver == MHZ) return mhz_get_co2();
|
|
|
|
// Should be unreachable
|
|
panic(T.error_driver);
|
|
return -1; // suppress warning
|
|
}
|
|
|
|
void set_zero() {
|
|
if (driver == AQC) { aqc_set_zero(); return; }
|
|
if (driver == MHZ) { mhz_set_zero(); return; }
|
|
|
|
// Should be unreachable
|
|
panic(T.error_driver);
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
Serial.println("Operame start");
|
|
|
|
digitalWrite(pin_backlight, HIGH);
|
|
display.init();
|
|
display.fillScreen(TFT_BLACK);
|
|
display.setRotation(1);
|
|
sprite.createSprite(display.width(), display.height());
|
|
|
|
OperameLanguage::select(T, LANGUAGE);
|
|
|
|
if (!SPIFFS.begin(false)) {
|
|
display_lines(T.first_run, TFT_MAGENTA);
|
|
if (!SPIFFS.format()) {
|
|
display_big(T.error_format, TFT_RED);
|
|
delay(20*1000);
|
|
}
|
|
}
|
|
|
|
pinMode(pin_portalbutton, INPUT_PULLUP);
|
|
pinMode(pin_demobutton, INPUT_PULLUP);
|
|
pinMode(pin_pcb_ok, INPUT_PULLUP);
|
|
pinMode(pin_backlight, OUTPUT);
|
|
|
|
WiFiSettings.hostname = "operame-";
|
|
WiFiSettings.language = LANGUAGE;
|
|
WiFiSettings.begin();
|
|
OperameLanguage::select(T, WiFiSettings.language);
|
|
|
|
while (digitalRead(pin_pcb_ok)) {
|
|
display_big(T.error_module, TFT_RED);
|
|
delay(1000);
|
|
}
|
|
|
|
display_logo();
|
|
delay(2000);
|
|
|
|
hwserial1.begin(9600, SERIAL_8N1, pin_sensor_rx, pin_sensor_tx);
|
|
|
|
if (aqc_get_co2() >= 0) {
|
|
driver = AQC;
|
|
hwserial1.setTimeout(100);
|
|
Serial.println("Using AQC driver.");
|
|
} else {
|
|
driver = MHZ;
|
|
mhz_setup();
|
|
Serial.println("Using MHZ driver.");
|
|
}
|
|
|
|
// Initialize DHT device.
|
|
dht.begin();
|
|
|
|
for (auto& str : T.portal_instructions[0]) {
|
|
str.replace("{ssid}", WiFiSettings.hostname);
|
|
}
|
|
|
|
wifi_enabled = WiFiSettings.checkbox("operame_wifi", false, T.config_wifi);
|
|
ota_enabled = WiFiSettings.checkbox("operame_ota", false, T.config_ota) && wifi_enabled;
|
|
|
|
WiFiSettings.heading("CO2-niveaus");
|
|
co2_warning = WiFiSettings.integer("operame_co2_warning", 400, 5000, 700, T.config_co2_warning);
|
|
co2_critical = WiFiSettings.integer("operame_co2_critical",400, 5000, 800, T.config_co2_critical);
|
|
co2_blink = WiFiSettings.integer("operame_co2_blink", 800, 5000, 800, T.config_co2_blink);
|
|
|
|
WiFiSettings.heading("MQTT");
|
|
mqtt_enabled = WiFiSettings.checkbox("operame_mqtt", false, T.config_mqtt) && wifi_enabled;
|
|
String server = WiFiSettings.string("mqtt_server", 64, "", T.config_mqtt_server);
|
|
int port = WiFiSettings.integer("mqtt_port", 0, 65535, 1883, T.config_mqtt_port);
|
|
max_failures = WiFiSettings.integer("operame_max_failures", 0, 1000, 10, T.config_max_failures);
|
|
mqtt_topic = WiFiSettings.string("operame_mqtt_topic", WiFiSettings.hostname, T.config_mqtt_topic);
|
|
mqtt_interval = 1000UL * WiFiSettings.integer("operame_mqtt_interval", 10, 3600, 60, T.config_mqtt_interval);
|
|
mqtt_template = WiFiSettings.string("operame_mqtt_template", "{} PPM", T.config_mqtt_template);
|
|
WiFiSettings.info(T.config_template_info);
|
|
|
|
WiFiSettings.onConnect = [] {
|
|
display_big(T.connecting, TFT_BLUE);
|
|
check_portalbutton();
|
|
return 50;
|
|
};
|
|
WiFiSettings.onFailure = [] {
|
|
display_big(T.error_wifi, TFT_RED);
|
|
delay(2000);
|
|
};
|
|
static int portal_phase = 0;
|
|
static unsigned long portal_start;
|
|
WiFiSettings.onPortal = [] {
|
|
if (ota_enabled) setup_ota();
|
|
portal_start = millis();
|
|
};
|
|
WiFiSettings.onPortalView = [] {
|
|
if (portal_phase < 2) portal_phase = 2;
|
|
};
|
|
WiFiSettings.onConfigSaved = [] {
|
|
portal_phase = 3;
|
|
};
|
|
WiFiSettings.onPortalWaitLoop = [] {
|
|
if (WiFi.softAPgetStationNum() == 0) portal_phase = 0;
|
|
else if (! portal_phase) portal_phase = 1;
|
|
|
|
display_lines(T.portal_instructions[portal_phase], TFT_WHITE, TFT_BLUE);
|
|
|
|
if (portal_phase == 0 && millis() - portal_start > 10*60*1000) {
|
|
panic(T.error_timeout);
|
|
}
|
|
|
|
if (ota_enabled) ArduinoOTA.handle();
|
|
if (button(pin_portalbutton)) ESP.restart();
|
|
};
|
|
|
|
if (wifi_enabled) WiFiSettings.connect(false, 15);
|
|
|
|
static WiFiClient wificlient;
|
|
if (mqtt_enabled) mqtt.begin(server.c_str(), port, wificlient);
|
|
|
|
if (ota_enabled) setup_ota();
|
|
}
|
|
|
|
#define every(t) for (static unsigned long _lasttime; (unsigned long)((unsigned long)millis() - _lasttime) >= (t); _lasttime = millis())
|
|
|
|
void loop() {
|
|
static int co2;
|
|
static float h;
|
|
static float t;
|
|
|
|
every(5000) {
|
|
// Read CO2, humidity and temperature
|
|
co2 = get_co2();
|
|
h = dht.readHumidity();
|
|
t = dht.readTemperature();
|
|
// Print data to serial port
|
|
Serial.print(co2);
|
|
Serial.print(",");
|
|
Serial.print(t);
|
|
Serial.print(",");
|
|
Serial.print(h);
|
|
Serial.println();
|
|
}
|
|
|
|
every(50) {
|
|
if (co2 < 0) {
|
|
display_big(T.error_sensor, TFT_RED);
|
|
} else if (co2 == 0) {
|
|
display_big(T.wait);
|
|
} else {
|
|
// Check if there is a humidity sensor
|
|
if (isnan(h) || isnan(t)) {
|
|
Serial.println("Failed to read from DHT sensor!");
|
|
// Only display CO2 value (the old way)
|
|
// some MH-Z19's go to 10000 but the display has space for 4 digits
|
|
display_ppm(co2 > 9999 ? 9999 : co2);
|
|
} else {
|
|
// Display also humidity and temperature
|
|
display_ppm_t_h(co2 > 9999 ? 9999 : co2, t, h);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mqtt_enabled) {
|
|
mqtt.loop();
|
|
every(mqtt_interval) {
|
|
if (co2 <= 0) break;
|
|
connect_mqtt();
|
|
String message = mqtt_template;
|
|
message.replace("{}", String(co2));
|
|
retain(mqtt_topic, message);
|
|
}
|
|
}
|
|
|
|
if (ota_enabled) ArduinoOTA.handle();
|
|
check_buttons();
|
|
}
|