MaxO v0.1

OSC operations for ESP8266 + Max7219 matrixs led with micropython. Need an ESP8266 on a local network with internet gateway at least for install.

OSC commands :

• /demo
• /cls
• /text 'sometext'

OSC port : 9001 (change OSCport in maxserver.py)

Obviously change /dev/cu.usbserial-1D1310 with your serial port like /dev/tty.USB0

Hardware connections

Connections wemos D1 mini https://docs.wemos.cc/en/latest/d1/d1_mini_lite.html

5V VCC

GND GND

D7 MOSI (GPIO13) DIN

D8 CS (GPIO15) CS

D5 SCK (GPIO14) CLK

Flash micropython firmware

Download micropython firmware for Wemos D1 mini (ESP8266) 1 Mo

https://micropython.org/resources/firmware/esp8266-1m-20200902-v1.13.bin

esptool.py erase_flash

esptool.py --port /dev/cu.usbserial-1D1310 --baud 1000000 write_flash --flash_size=4MB -fm dio 0 PATHTO/esp8266-1m-20200902-v1.13.bin

install ampy

pip3 install ampy

Local Wifi config

Set your wifi ssid/password in netconf.py

Matrixs config vertical or horizontal

Edit in matrix9.py

screen = max7219.Max7219(8, 32, spi, Pin(15))

8 is x. 32 is y (4 8x8 max7219)

Transfer MaxO

• ampy -p /dev/cu.usbserial-1D1310 put boot.py
• ampy -p /dev/cu.usbserial-1D1310 put wlan.py
• ampy -p /dev/cu.usbserial-1D1310 put netconf.py
• ampy -p /dev/cu.usbserial-1D1310 put main.py
• ampy -p /dev/cu.usbserial-1D1310 put maxserver.py
• ampy -p /dev/cu.usbserial-1D1310 put max9.py
• ampy -p /dev/cu.usbserial-1D1310 put max7219.py
• ampy -p /dev/cu.usbserial-1D1310 put uosc

Onboard install library via Internet

• ampy -p /dev/cu.usbserial-1D1310 run wlan
• screen /dev/cu.usbserial-1D1310 115200

type in micropython interactive :

• import upip
• upip.install('uasyncio')
• upip.install('ffilib')

reboot with onboard reset button

reboot

The 'screen' should show you debug prints