LJ Packer

Welcome to LJ Packer, LJ software's virtual machine images provider.

Errr... Sorry but what is this "LJ" thing already?

• LJ is used to command multiple LASERS via a CENTRAL SERVER
• CENTRAL SERVER exchanges data with LASERS and POINTS GENERATORS on a Local Area Network (LAN)
• LASERS use ETHER-DREAMS interfaces to connect to LAN
• POINTS GENERATORS store their output in a REDIS located on CENTRAL SERVER

The images produced by this code provide CENTRAL SERVER and REDIS, plus some help to configure LAN. You will need LASERS and ETHER-DREAMS to get a fully working setup.

OK, but why?

LJ is written in Python with lots of dependencies and can be a bit difficult to configure, hence the need for such bootable and easily (re)configured system images.

But be cautious, the images are not safe to run on the Internet AT ALL! The SSH server is open for root login with a VERY simple password:

root:laser

Run the images produced with care on local / airtight networks.

Images

No official repository for images yet, but this is expected in the future.

Limitations

All of this has been tested only on Debian 10 Buster. YMMV.

Crash course

These instructions are for building images, see below to run images.

You need to install packer first, the syntax is valid with version 1.6+

Compiling for qemu (recommanded):

sudo apt install qemu qemu-kvm
git clone https://git.interhacker.space/teamlaser/lj-packer
cd lj-packer
# The "no-desktop" install
PACKER_LOG=1 sudo packer build -on-error=ask --only=teamlaser-lj  build.json
# The "desktop" install
PACKER_LOG=1 sudo packer build -on-error=ask --only=teamlaser-lj-xfce  build.json

Compile for LXC (not fully tested, should work):

sudo apt install lxc
PACKER_LOG=1 sudo packer build -on-error=ask --only=teamlaser-lj-lxc  build.json

All the compilation should be automatic, and result with images in local directories (output, output)

Running in KVM

All commands are given for terminal use and probably require root access.

You will need to select one of the images from those:

export IMAGE=packer-teamlaser-lj-xfce
export IMAGE=packer-teamlaser-lj

kvm:user : KVM with simple/no-LAN network

It is the simple solution, useful for fast testing the software. You will access the VM services through "virtual" localhost ports of your machine. But the VM will not be able to exchange data on LAN.

kvm:user Local Ports to VM ports

Ports translations are done by adding 10000 to each VM service port.

• 10022 SSH(22)
• 10080 HTTP(80)
• 10443 HTTPS(443)
• 16379 REDIS(6379)
• 16454 ARTNET(6454)
• 19001 WEBSOCKET(9001)

So, to connect to the SSH server you will use the 10022 port on localhost.

kvm:user Booting

# start the VM
sudo /usr/bin/qemu-system-x86_64 \
  -m 2048M  -boot once=d \
  -machine type=pc,accel=kvm \
  -display gtk -vnc 127.0.0.1:6 \
  -name ${IMAGE}\
  -drive file=${IMAGE},format=qcow2 \
  -device virtio-net,netdev=user.0 \
  -netdev user,id=user.0,hostfwd=tcp::10022-:22,hostfwd=tcp::10080-:80,hostfwd=tcp::10443-:443,hostfwd=tcp::16379-:6379,hostfwd=tcp::6454-:6454,hostfwd=tcp::19001-:9001,hostfwd=tcp::19002-:9002

kvm:user Connecting

# Wait until ssh/login is available in the VM
# Type password "laser" i.e. "lqser" on AZERTY keyboards
ssh root@localhost -p10022

kvm:bridge KVM with full network access

It is a more complex solution, useful for real use of LJ with LASERS on LAN. You will access the VM services through "virtual" localhost ports of your machine. But the VM will not be able to exchange data on LAN.

Here is the documentation on how to setup a bridge interface on your machine. It is a bit complex, but follow the instructions and it should be fine...

kvm:bridge 0. First some variables / names we will use

# 0. Names / concepts
HOST      The name used to define your laptop (or any other machine running qemu)
GUEST     The name used to define the qemu virtual machine

# 0. Variables
HOST_IF   The variable for HOST's network interface, the one used for LAN. Ex: eth0, ens3
HOST_IP   The variable for HOST's IP address on the LAN. Ex: 192.168.1.20
IP_RANGE  The variable for size of a the subnet for your LAN. Ex: /24
GUEST_IF  The variable for GUEST's network interface.
GUEST_IP  The variable for GUEST's IP address on the LAN. Ex: 192.168.1.21
SU        The sudo command required if not running as root

## As an Example, here is a working configuration

export HOST_IF=enx9cebe8ce6930
export HOST_IP=192.168.1.99
export IP_RANGE=/24
export SU='sudo '

kvm:bridge 1. Configuring HOST network interfaces

# 1. Configure HOST: set up bridge over HOST_IF

$SU ip l set dev ${HOST_IF} down
$SU brctl addbr br0
$SU brctl addif br0 ${HOST_IF}
$SU ip tuntap add tap0 mode tap
$SU brctl addif br0 tap0
$SU iptables -t nat -A POSTROUTING -o br0 -j MASQUERADE
$SU iptables -I FORWARD -i br0 -j ACCEPT
$SU ip l set dev ${HOST_IF} up
$SU ip l set dev br0 up
$SU ip l set dev tap0 up
$SU ip a add ${HOST_IP}${IP_RANGE} dev br0
$SU sysctl net.ipv4.ip_forward=1

##troubleshooting: there must be NO ip address attached to $HOST_IF
$SU ip address show dev ${HOST_IF} | grep global || echo -e "\n\e[31mOops.... Remove all IP addresses from ${HOST_IF}! Use:\e[0m\n\n$SU ip address del (address/range shown above) dev ${HOST_IF}"

kvm:bridge 2. Booting the VM

Notice how the net model changed: we have a MAC address and use the tap interface to exchange network packets.

sudo /usr/bin/qemu-system-x86_64\
 -m 2048M  -boot once=d\
 -machine type=pc,accel=kvm\
 -display gtk -vnc 127.0.0.1:6\
 -name ${IMAGE}\
 -drive file=${IMAGE},format=qcow2\
 -net nic,model=virtio,macaddr=00:00:00:00:00:01\
 -net tap,ifname=tap0\

kvm:bridge 3. Configuring GUEST's network

This part may be more or less complex, as a DHCP server might automatically assign an IP address to your VM.

Use the connection via login described below (4.2) : a script will check the network connectivity on login.

According to its output,

• you might be fine: it will show an IP address which you can use to connect using standard protocols, i.e. SSH, HTTPS, etc.

• you might be required to configure the network. In such a case, you will be asked

  • if you want to configure the network with a graphical tool. This is an option for expert users. It uses the nmtui (network-manager Terminal UI) interface. Use and to forget to your interface
  • to provide the GUEST_IP/RANGE and the GUEST_GW to use.
    • GUEST_IP/RANGE are depending on your HOST_IP in the LAN
    • GUEST_GW is your HOST_IP
  • Also, can do things by yourself with the following commands on GUEST:

  ip address add  ${GUEST_IP}/${IP_RANGE} dev ${GUEST_IF}
  ip route add default via ${HOST_IP}
  

kvm:bridge 4. Connecting

kvm:bridge 4.1 Connecting via login

If you started the QEMU with a display, you can connect to it as root. CAUTION for french users, it as QWERTY keyboard mapping, typelqser

USER "root"
PASS "laser" # i.e. "lqser" on AZERTY keyboards

kvm:bridge 4.2 Connecting via SSH

# Wait until ssh/login is available in the VM
# Type password "laser" i.e. "lqser" on AZERTY keyboards
ssh root@${GUEST_IP}

Todos

[] Export USB devices [] Nginx redirect to https [] Nginx wss websockets redirect

[x] @todo deploy http(+s with snakeoil cert) with nginx [x] @todo read IP from updateUI.pu OR BETTER read IP addresses from a common file