Compare commits
No commits in common. "dev/marc" and "master" have entirely different histories.
25
LJ.conf
25
LJ.conf
@ -2,7 +2,7 @@
|
||||
lasernumber = 1
|
||||
debug = 0
|
||||
rediserverip = 0.0.0.0
|
||||
wwwip = 127.0.0.1
|
||||
wwwip = 192.168.1.14
|
||||
nozoscip = 127.0.0.1
|
||||
oscserverip = 127.0.0.1
|
||||
autostart = artnet
|
||||
@ -10,23 +10,22 @@ wstype = ws
|
||||
wsport = 9001
|
||||
|
||||
[laser0]
|
||||
dac_family = extern_cmd
|
||||
cmd = ./tracers/lj_rust/lj_rust ./tracers/lj_rust/settings.toml
|
||||
color = -1
|
||||
type = DS1000
|
||||
ip = 192.168.1.35
|
||||
kpps = 25000
|
||||
type = LOCAL
|
||||
dac_family = etherdream
|
||||
ip = 127.0.0.1
|
||||
kpps = 10000
|
||||
centerx = 7.0
|
||||
centery = 61.0
|
||||
zoomx = 312.0
|
||||
zoomy = 1039.0
|
||||
sizex = 32000.0
|
||||
sizey = 32000.0
|
||||
finangle = -0.02263757042605427
|
||||
intens = 255.0
|
||||
red = 100
|
||||
green = 100
|
||||
blue = 100
|
||||
centerx = -21504.0
|
||||
centery = 21504.0
|
||||
zoomx = 8.90625
|
||||
zoomy = 20.671875
|
||||
sizex = 32000.0
|
||||
sizey = 32000.0
|
||||
finangle = 0.0
|
||||
swapx = -1
|
||||
swapy = -1
|
||||
lsteps = [ (1.0, 8),(0.25, 3), (0.75, 3), (1.0, 10)]
|
||||
|
||||
0
configure.py
Executable file → Normal file
0
configure.py
Executable file → Normal file
@ -14,13 +14,13 @@ Commands reference. Use commands from websocket (webUI) or OSC, do not set value
|
||||
DAChecks()
|
||||
UpdateAllwww()
|
||||
|
||||
/forwardui "htmlid args"
|
||||
/forwardui "htmlid args"
|
||||
|
||||
/scale/X/lasernumber value (0-200)
|
||||
/scale/Y/lasernumber value (0-200)
|
||||
|
||||
/client or note on < 8 : change client displayed for Current Laser
|
||||
23 < /noteon < 32 : PL number displayed on webUI simulator
|
||||
23 < /noteon < 32 : PL number displayed on webUI simulator
|
||||
|
||||
/grid/lasernumber value (0 or 1) : switch given laser with grid display on or off
|
||||
|
||||
@ -34,15 +34,15 @@ Live change of kpps is not implemented in newdac.py. Change will effect next sta
|
||||
|
||||
/angle/lasernumber value : angle correction for given laser by value (0-360)
|
||||
|
||||
/intens/lasernumber value : increase/decrease intensity for given laser by value
|
||||
/intens/lasernumber value : increase/decrease intensity for given laser by value
|
||||
|
||||
/resampler/lasernumber lsteps : change resampling strategy (glitch art) for given laser
|
||||
lsteps is a string like "[ (1.0, 8),(0.25, 3), (0.75, 3), (1.0, 10)]"
|
||||
|
||||
/mouse/lasernumber value (0 or 1)
|
||||
|
||||
/mouse/lasernumber value (0 or 1)
|
||||
|
||||
/swap/X/lasernumber value (0 or 1)
|
||||
/swap/Y/lasernumber value (0 or 1)
|
||||
/swap/X/lasernumber value (0 or 1)
|
||||
/swap/Y/lasernumber value (0 or 1)
|
||||
|
||||
/loffset/X/lasernumber value : change X offset of given laser to value (-32000/32000)
|
||||
/loffset/Y/lasernumber value : change Y offset of given laser to value (-32000/32000)
|
||||
@ -50,10 +50,10 @@ lsteps is a string like "[ (1.0, 8),(0.25, 3), (0.75, 3), (1.0, 10)]"
|
||||
/order value : instruct tracer what to do.
|
||||
|
||||
0 : display user pointlist with current client key. See below for client key.
|
||||
1 : pull in redis a new correction matrix (EDH)
|
||||
2 : display black
|
||||
1 : pull in redis a new correction matrix (EDH)
|
||||
2 : display black
|
||||
3 : display grid
|
||||
4 : resampler
|
||||
4 : resampler
|
||||
5 : pull in redis a new client key
|
||||
6 : Max Intensity Change = reread redis key /intensity
|
||||
7 : kpps change = reread redis key /kpps
|
||||
@ -74,12 +74,12 @@ lsteps is a string like "[ (1.0, 8),(0.25, 3), (0.75, 3), (1.0, 10)]"
|
||||
|
||||
Example : client 0 send 2 point lists one for laser 0 and one for laser 1 by sending in redis :
|
||||
/pl/0/0 and /pl/0/1
|
||||
The "client key" when client 0 is selected to be displayed by lasers is "/pl/0/".
|
||||
Each tracer pull its pointlist by using the current client key "/pl/0/"
|
||||
The "client key" when client 0 is selected to be displayed by lasers is "/pl/0/".
|
||||
Each tracer pull its pointlist by using the current client key "/pl/0/"
|
||||
and add its laser number at startup : /pl0/0 ant /pl/0/1
|
||||
|
||||
"Client" is a concept. Imagine in a demoparty there is 4 lasers.
|
||||
John and Paul want to draw on all lasers.
|
||||
"Client" is a concept. Imagine in a demoparty there is 4 lasers.
|
||||
John and Paul want to draw on all lasers.
|
||||
Let's give John client 0, he will send points to /pl/0/0, /pl/0/1, /pl/0/2 and /pl/0/3.
|
||||
|
||||
Paul is client 1, so he will use /pl/1/0, /pl/1/1, /pl/1/2 and /pl/1/3.
|
||||
@ -87,7 +87,7 @@ Paul is client 1, so he will use /pl/1/0, /pl/1/1, /pl/1/2 and /pl/1/3.
|
||||
Both can send their pointlists to redis server.
|
||||
When John get the lasers switch to client 0, when it's Paul turn switch to client 1.
|
||||
|
||||
But say Bob and Lisa needs only 2 lasers each. Give them client 2.
|
||||
But say Bob and Lisa needs only 2 lasers each. Give them client 2.
|
||||
Bob could use /pl/2/0 and /pl/2/1 and Lisa could use /pl/2/2 and /pl/2/3.
|
||||
|
||||
|
||||
@ -96,18 +96,17 @@ Bob could use /pl/2/0 and /pl/2/1 and Lisa could use /pl/2/2 and /pl/2/3.
|
||||
import types, time, socket, math
|
||||
from libs3 import gstt
|
||||
import redis
|
||||
from libs3 import OSC3
|
||||
from libs3 import OSC3
|
||||
from libs3 import settings, plugins, homographyp,log
|
||||
|
||||
|
||||
r = redis.StrictRedis(host=gstt.RediServerIP , port=6379, db=0)
|
||||
#r = redis.StrictRedis(host=gstt.RediServerIP , port=6379, db=0, password='-+F816Y+-')
|
||||
|
||||
workers = []
|
||||
|
||||
GenericCommands = ["start", "align", "ljclient", "scene", "addest", "deldest", "dest", "clientnumber", "vcvrack", "fft", "mitraille", "faceosc", "midigen", "viewgen", "audiogen", "noteon", "cc", "ljpong", "ljwars", "mouse", "emergency", "simu", "status", "run", "nozoid", "planet", "live", "words", "ai", "bank0", "pose", "lj", "cycl", "glyph", "pong", "maxw", "custom1", "square", "regen", "trckr", "aurora", "line1", "ForwardUI", "settings", "debug", "pl", "plugins"]
|
||||
|
||||
|
||||
|
||||
def UserOn(laser):
|
||||
|
||||
print("User for laser ", laser)
|
||||
@ -131,7 +130,7 @@ def BlackOn(laser):
|
||||
plugins.sendWSall("/status Black on laser " + str(laser))
|
||||
sendOSCUI('/black/'+str(laser),1)
|
||||
r.set('/order/'+str(laser), 2)
|
||||
|
||||
|
||||
|
||||
def GridOn(laser):
|
||||
|
||||
@ -165,7 +164,7 @@ def LasClientChange(clientnumber):
|
||||
r.set('/order/'+str(laserid), 5)
|
||||
else:
|
||||
print("ERROR : Maximum number of scenes is set to ", gstt.MaxScenes)
|
||||
|
||||
|
||||
|
||||
def SceneChange(newscene):
|
||||
|
||||
@ -191,7 +190,7 @@ def NoteOn(note):
|
||||
# Change laser client
|
||||
if note < 8:
|
||||
LasClientChange(note)
|
||||
|
||||
|
||||
# Change PL displayed on webui
|
||||
if note > 23 and note < 32:
|
||||
if note - 24 > gstt.LaserNumber -1:
|
||||
@ -199,8 +198,8 @@ def NoteOn(note):
|
||||
plugins.sendWSall("/redstatus No Laser"+str(note-24))
|
||||
plugins.sendWSall("/laser "+str(gstt.LaserNumber-1))
|
||||
plugins.SendAll("/laser "+str(gstt.LaserNumber-1))
|
||||
|
||||
else:
|
||||
|
||||
else:
|
||||
gstt.Laser = note -24
|
||||
print("Current Laser switched to", gstt.Laser)
|
||||
plugins.sendWSall("/status Laser " + str(gstt.Laser))
|
||||
@ -210,7 +209,7 @@ def NoteOn(note):
|
||||
plugins.sendWSall("/loffset/Y/" + str(gstt.Laser) +" " +str(gstt.centerY[gstt.Laser]))
|
||||
plugins.sendWSall("/scale/X/" + str(gstt.Laser) +" " + str(gstt.zoomX[gstt.Laser]))
|
||||
plugins.sendWSall("/scale/Y/" + str(gstt.Laser) +" " +str(gstt.zoomY[gstt.Laser]))
|
||||
|
||||
|
||||
|
||||
def Scim(path, tags, args, source):
|
||||
|
||||
@ -224,7 +223,7 @@ def Scim(path, tags, args, source):
|
||||
plugins.sendWSall("/redstatus No Laser"+str(note-24))
|
||||
plugins.sendWSall("/laser "+str(gstt.LaserNumber-1))
|
||||
|
||||
else:
|
||||
else:
|
||||
gstt.Laser = laser -24
|
||||
plugins.sendWSall("/status Laser " + str(gstt.Laser))
|
||||
print("Current Laser switched to", gstt.Laser)
|
||||
@ -233,15 +232,15 @@ def Scim(path, tags, args, source):
|
||||
def Line1(path, tags, args, source):
|
||||
|
||||
line1 = args[0]
|
||||
print("OSC /line1", line1)
|
||||
print("OSC /line1", line1)
|
||||
plugins.sendWSall("/line1 " +"Fx "+line1)
|
||||
|
||||
|
||||
# forward
|
||||
# forward
|
||||
def ForwardUI(path, tags, args, source):
|
||||
|
||||
line = args[0]
|
||||
print("OSC /forwardui to WebUI :", line)
|
||||
print("OSC /forwardui to WebUI :", line)
|
||||
print('from path', path, 'args', args)
|
||||
plugins.sendWSall(line)
|
||||
sendOSCUI('/status',line)
|
||||
@ -265,12 +264,12 @@ def handler(oscpath, args):
|
||||
|
||||
|
||||
# 2 incoming cases : generic or specific for a given lasernumber :
|
||||
|
||||
|
||||
#
|
||||
# Generic : Commands without a laser number
|
||||
#
|
||||
|
||||
if oscpath[1] in GenericCommands:
|
||||
if oscpath[1] in GenericCommands:
|
||||
|
||||
if gstt.debug > 0:
|
||||
print("GenericCommand :", oscpath[1], "with args", args)
|
||||
@ -287,7 +286,7 @@ def handler(oscpath, args):
|
||||
r.set("/"+oscpath[1]+"/"+oscpath[2]+"/"+oscpath[3], args[0])
|
||||
|
||||
|
||||
if oscpath[0] == "pl" :
|
||||
if oscpath[0] == "pl" :
|
||||
r.set(oscpath, args[0])
|
||||
|
||||
|
||||
@ -315,7 +314,7 @@ def handler(oscpath, args):
|
||||
if gstt.debug >0:
|
||||
print(("/" + args[0] + "/start 1"))
|
||||
print(("/status got pong from "+ args[0] +"."))
|
||||
|
||||
|
||||
plugins.sendWSall("/" + args[0] + "/start 1")
|
||||
#plugins.sendWSall("/status got pong from "+ args[0] +".")
|
||||
|
||||
@ -334,25 +333,25 @@ def handler(oscpath, args):
|
||||
|
||||
elif oscpath[1] == "mouse":
|
||||
Mouse(int(args[0]),int(args[1]),int(args[2]),int(args[3]))
|
||||
|
||||
|
||||
|
||||
# /emergency value (0 or 1)
|
||||
# /emergency value (0 or 1)
|
||||
elif oscpath[1] == "emergency":
|
||||
|
||||
|
||||
if args[0] == "1":
|
||||
|
||||
|
||||
for laser in range(gstt.lasernumber):
|
||||
print("Black requested for laser ", laser)
|
||||
BlackOn(laser)
|
||||
print("EMERGENCY MODE")
|
||||
plugins.sendWSall("/status EMERGENCY MODE")
|
||||
plugins.sendWSall("/status EMERGENCY MODE")
|
||||
|
||||
else:
|
||||
for laser in range(gstt.lasernumber):
|
||||
print("Back to normal for laser ", laser)
|
||||
UserOn(laser)
|
||||
|
||||
# Plugins commands :
|
||||
# Plugins commands :
|
||||
elif oscpath[1] == "plugins":
|
||||
# /plugins/start pluginame
|
||||
if oscpath[2] == "start":
|
||||
@ -374,9 +373,9 @@ def handler(oscpath, args):
|
||||
print("Restarting plugin :",args[0])
|
||||
print()
|
||||
plugins.Restart(args[0])
|
||||
|
||||
|
||||
# Settings commands :
|
||||
|
||||
|
||||
# Settings commands :
|
||||
elif oscpath[1] == "settings":
|
||||
if oscpath[2] == "lasers":
|
||||
print()
|
||||
@ -421,7 +420,7 @@ def handler(oscpath, args):
|
||||
print("** RESTART LJ **")
|
||||
#LJautokill()
|
||||
|
||||
|
||||
|
||||
if oscpath[2] == "restart":
|
||||
print()
|
||||
print("Restarting", args[0], "...")
|
||||
@ -458,25 +457,25 @@ def handler(oscpath, args):
|
||||
|
||||
else:
|
||||
laser = int(oscpath[3])
|
||||
|
||||
|
||||
#print "args[0] :",args[0]," ", type(args[0])
|
||||
|
||||
# /black/lasernumber value (0 or 1)
|
||||
# /black/lasernumber value (0 or 1)
|
||||
if oscpath[1] == "black":
|
||||
|
||||
|
||||
if args[0] == "1":
|
||||
print("Black requested for laser ", laser)
|
||||
BlackOn(laser)
|
||||
BlackOn(laser)
|
||||
else:
|
||||
print("User mode for laser ", laser)
|
||||
UserOn(laser)
|
||||
|
||||
# /grid/lasernumber value (0 or 1)
|
||||
|
||||
# /grid/lasernumber value (0 or 1)
|
||||
if oscpath[1] == "grid":
|
||||
|
||||
|
||||
if args[0] == "1":
|
||||
print("Grid requested for laser ", laser)
|
||||
GridOn(laser)
|
||||
GridOn(laser)
|
||||
else:
|
||||
print("No grid for laser ", laser)
|
||||
UserOn(laser)
|
||||
@ -486,7 +485,7 @@ def handler(oscpath, args):
|
||||
print("New IP for laser ", laser)
|
||||
gstt.lasersIPS[laser]= args[0]
|
||||
settings.Write()
|
||||
|
||||
|
||||
# /kpps/lasernumber value
|
||||
# Live change of kpps is not implemented in newdac.py. Change will effect next startup.
|
||||
if oscpath[1] == "kpps":
|
||||
@ -496,59 +495,59 @@ def handler(oscpath, args):
|
||||
sendOSCUI('/kpps/' + str(laser), args[0])
|
||||
r.set('/kpps/' + str(laser), str(args[0]))
|
||||
r.set('/order/'+str(laser), 7)
|
||||
|
||||
# /angle/lasernumber value
|
||||
|
||||
# /angle/lasernumber value
|
||||
if oscpath[1] == "angle":
|
||||
print("New Angle modification for laser ", oscpath[2], ":", float(args[0]))
|
||||
gstt.finANGLE[laser] = math.radians(float(args[0]))
|
||||
sendOSCUI('/angle/' + str(laser), gstt.finANGLE[laser])
|
||||
NewEDH(laser)
|
||||
print("New angle", gstt.finANGLE[laser])
|
||||
|
||||
# /intens/lasernumber value
|
||||
|
||||
# /intens/lasernumber value
|
||||
if oscpath[1] == "intens":
|
||||
print("LJ2 : New intensity requested for laser ", laser, ":", int(args[0]))
|
||||
plugins.sendWSall("/status Intensity " + str(args[0]))
|
||||
sendOSCUI('/intens/' + str(laser), args[0])
|
||||
r.set('/intensity/' + str(laser), str(args[0]))
|
||||
r.set('/order/'+str(laser), 6)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# /resampler/lasernumber lsteps
|
||||
# lsteps is a string like "[ (1.0, 8),(0.25, 3), (0.75, 3), (1.0, 10)]"
|
||||
if oscpath[1] == "resampler":
|
||||
#print"resampler with args", args
|
||||
Resampler(laser,args)
|
||||
|
||||
|
||||
# /mouse/lasernumber value (0 or 1)
|
||||
|
||||
|
||||
# /mouse/lasernumber value (0 or 1)
|
||||
if oscpath[1] == "mouse":
|
||||
|
||||
|
||||
if args[0] == "1":
|
||||
print("Mouse requested for laser ", oscpath[2])
|
||||
gstt.Laser = oscpath[2]
|
||||
else:
|
||||
print("No mouse for laser ", oscpath[2])
|
||||
|
||||
|
||||
# /swap/X/lasernumber value (0 or 1)
|
||||
|
||||
|
||||
# /swap/X/lasernumber value (0 or 1)
|
||||
if oscpath[1] == "swap" and oscpath[2] == "X":
|
||||
|
||||
|
||||
print("swapX was", gstt.swapX[laser])
|
||||
if args[0] == "0":
|
||||
print("swap X -1 for laser ", laser)
|
||||
gstt.swapX[laser]= -1
|
||||
NewEDH(laser)
|
||||
|
||||
|
||||
else:
|
||||
print("swap X 1 for laser ", laser)
|
||||
gstt.swapX[laser]= 1
|
||||
NewEDH(laser)
|
||||
|
||||
# /swap/Y/lasernumber value (0 or 1)
|
||||
|
||||
# /swap/Y/lasernumber value (0 or 1)
|
||||
if oscpath[1] == "swap" and oscpath[2] == "Y":
|
||||
|
||||
|
||||
print("swapY was", gstt.swapX[laser])
|
||||
if args[0] == "0":
|
||||
print("swap Y -1 for laser ", laser)
|
||||
@ -558,7 +557,7 @@ def handler(oscpath, args):
|
||||
print("swap Y 1 for laser ", laser)
|
||||
gstt.swapY[laser]= 1
|
||||
NewEDH(laser)
|
||||
|
||||
|
||||
|
||||
# /loffset/X/lasernumber value
|
||||
if oscpath[1] == "loffset" and oscpath[2] == "X":
|
||||
@ -566,7 +565,7 @@ def handler(oscpath, args):
|
||||
print("offset/X laser", laser, "modified to", args[0])
|
||||
gstt.centerX[laser] = float(args[0])
|
||||
NewEDH(laser)
|
||||
|
||||
|
||||
|
||||
# /loffset/Y/lasernumber value
|
||||
if oscpath[1] == "loffset" and oscpath[2] == "Y":
|
||||
@ -574,18 +573,18 @@ def handler(oscpath, args):
|
||||
print("offset/Y laser", laser, "modified to", args[0])
|
||||
gstt.centerY[laser] = float(args[0])
|
||||
NewEDH(laser)
|
||||
|
||||
|
||||
|
||||
|
||||
# /scale/X/lasernumber value
|
||||
if oscpath[1] == "scale" and oscpath[2] == "X":
|
||||
|
||||
|
||||
gstt.zoomX[laser] = float(args[0])
|
||||
print("scale/X laser", laser , "modified to", gstt.zoomX[laser])
|
||||
NewEDH(laser)
|
||||
|
||||
|
||||
# /scale/Y/lasernumber value
|
||||
if oscpath[1] == "scale" and oscpath[2] == "Y":
|
||||
|
||||
|
||||
gstt.zoomY[laser] = float(args[0])
|
||||
print("scale/Y laser", laser, "modified to", gstt.zoomY[laser])
|
||||
NewEDH(laser)
|
||||
@ -593,22 +592,22 @@ def handler(oscpath, args):
|
||||
|
||||
# OSC UI feedback
|
||||
def sendOSCUI(oscaddress,oscargs=''):
|
||||
|
||||
|
||||
if gstt.TouchOSCUI == True:
|
||||
oscmsg = OSC3.OSCMessage()
|
||||
oscmsg.setAddress(oscaddress)
|
||||
oscmsg.append(oscargs)
|
||||
|
||||
|
||||
oscui = OSC3.OSCClient()
|
||||
oscui.connect((gstt.TouchOSCIP, 8001))
|
||||
oscui.connect((gstt.TouchOSCIP, 8001))
|
||||
#print("main sending OSC UI message :", oscmsg, "to", gstt.TouchOSCIP, ":8001")
|
||||
if gstt.debug >0:
|
||||
print("main sending OSC UI message :", oscmsg, "to", gstt.TouchOSCIP, ":8001")
|
||||
|
||||
|
||||
try:
|
||||
oscui.sendto(oscmsg, (gstt.TouchOSCIP, 8001))
|
||||
oscmsg.clearData()
|
||||
|
||||
|
||||
except:
|
||||
print ('Connection to OSC UI refused : died ?')
|
||||
pass
|
||||
@ -640,7 +639,7 @@ def UpdateOSCUI(laserid):
|
||||
sendOSCUI("/swap/Y/" + str(laserid), 0)
|
||||
|
||||
|
||||
#
|
||||
#
|
||||
# Different useful codes for some commands
|
||||
#
|
||||
|
||||
@ -701,7 +700,7 @@ def isOpen(ip):
|
||||
time.sleep(1)
|
||||
|
||||
finally:
|
||||
|
||||
|
||||
dacksock.close()
|
||||
return istate
|
||||
|
||||
@ -727,27 +726,22 @@ def LJautokill():
|
||||
print('Shutdown order for tracer '+str(laser), 9)
|
||||
r.set('/order/'+str(laser), 9)
|
||||
|
||||
for (n,dac_worker) in enumerate(workers):
|
||||
log.warn(f'Entering tracer{n} ...')
|
||||
dac_worker.join()
|
||||
|
||||
lasernumber= gstt.LaserNumber -1
|
||||
# log.warn("Ending tracer0...")
|
||||
# worker0.join()
|
||||
# if lasernumber >0:
|
||||
# log.warn("Ending tracer1...")
|
||||
# worker1.join()
|
||||
# if lasernumber >1:
|
||||
# log.warn("Ending tracer2...")
|
||||
# worker2.join()
|
||||
# if lasernumber >2:
|
||||
# log.warn("Ending tracer3...")
|
||||
# worker3.join()
|
||||
|
||||
|
||||
log.warn("Ending tracer0...")
|
||||
worker0.join()
|
||||
if lasernumber >0:
|
||||
log.warn("Ending tracer1...")
|
||||
worker1.join()
|
||||
if lasernumber >1:
|
||||
log.warn("Ending tracer2...")
|
||||
worker2.join()
|
||||
if lasernumber >2:
|
||||
log.warn("Ending tracer3...")
|
||||
worker3.join()
|
||||
|
||||
log.warn("Laser feedbacks resetting...")
|
||||
for laserid in range(0,lasernumber+1):
|
||||
|
||||
|
||||
r.set('/lack/'+str(laserid),64)
|
||||
r.set('/lstt/'+str(laserid),64)
|
||||
r.set('/cap/'+str(laserid),0)
|
||||
@ -765,9 +759,9 @@ def DAChecks():
|
||||
|
||||
if isOpen(gstt.lasersIPS[dac]):
|
||||
print("DAC", dac, "at", gstt.lasersIPS[dac], ": UP")
|
||||
gstt.dacs[gstt.dacnumber] = dac
|
||||
gstt.dacs[gstt.dacnumber] = dac
|
||||
gstt.dacnumber +=1
|
||||
|
||||
|
||||
else:
|
||||
print("DAC", dac, "at", gstt.lasersIPS[dac], ": DOWN")
|
||||
|
||||
@ -792,19 +786,19 @@ For reference values of EDH modifier if assign to keyboard keys (was alignp)
|
||||
|
||||
gstt.zoomX[gstt.Laser] += 0.1
|
||||
gstt.zoomY[gstt.Laser] -= 0.1
|
||||
|
||||
|
||||
gstt.zoomY[gstt.Laser] += 0.1
|
||||
|
||||
|
||||
gstt.sizeX[gstt.Laser] -= 50
|
||||
|
||||
|
||||
gstt.sizeX[gstt.Laser] += 50
|
||||
|
||||
|
||||
gstt.sizeY[gstt.Laser] -= 50
|
||||
|
||||
|
||||
gstt.sizeY[gstt.Laser] += 50
|
||||
|
||||
|
||||
gstt.finANGLE[gstt.Laser] -= 0.001
|
||||
|
||||
|
||||
gstt.finANGLE[gstt.Laser] += 0.001
|
||||
|
||||
Code for bit analysis 2 bits / laser to encode order.
|
||||
@ -819,7 +813,7 @@ Code for bit analysis 2 bits / laser to encode order.
|
||||
#order = r.get('/order')
|
||||
#neworder = order & ~(1<< laser*2)
|
||||
#neworder = neworder & ~(1<< 1+ laser*2)
|
||||
#r.set('/order', str(neworder))
|
||||
#r.set('/order', str(neworder))
|
||||
|
||||
# Laser bit 0 = 0 and bit 1 = 1 : New EDH
|
||||
#order = r.get('/order')
|
||||
|
||||
@ -49,13 +49,13 @@ Laser = 0
|
||||
# Can be changed with /noteon 24-31
|
||||
simuPL = 1
|
||||
|
||||
# gstt.laserIPS.
|
||||
# gstt.laserIPS.
|
||||
lasersIPS = ['192.168.1.5','192.168.1.6','192.168.1.3','192.168.1.4']
|
||||
|
||||
maxdacs = 4
|
||||
|
||||
# Autodetected by DAChecks() in main3 :
|
||||
# Store connected dacs. Maybe laser 1 in LJ.conf is not connected but Laser 2 is.
|
||||
# Store connected dacs. Maybe laser 1 in LJ.conf is not connected but Laser 2 is.
|
||||
dacs = [-1, -1, -1, -1]
|
||||
# Actual number of connected DACs
|
||||
dacnumber = 0
|
||||
@ -63,9 +63,8 @@ dacnumber = 0
|
||||
# gstt.kpps stores kpps for each laser.
|
||||
# ** Will be overridden by LJ.conf file values **
|
||||
kpps = [25000,25000,25000,25000]
|
||||
lasertype = ["LOCAL","LOCAL","LOCAL","LOCAL"]
|
||||
dacfamily = ["etherdream","etherdream","etherdream","etherdream"]
|
||||
cmd = [None,None,None,None]
|
||||
lasertype = ["LOCAL","LOCAL","LOCAL","LOCAL"]
|
||||
dacfamily = ["etherdream","etherdream","etherdream","etherdream"]
|
||||
intensity = [-1,-1,-1,-1]
|
||||
intens = [-1,-1,-1,-1]
|
||||
red = [100,100,100,100]
|
||||
@ -75,17 +74,17 @@ blue = [100,100,100,100]
|
||||
# gstt.GridDisplay : if = 1 Curve points actually sent to PL are replaced by a grid
|
||||
GridDisplay = [0,0,0,0]
|
||||
|
||||
# Transformation Matrix for each laser
|
||||
# Transformation Matrix for each laser
|
||||
EDH = [[], [], [], []]
|
||||
|
||||
# Etherdreams reports
|
||||
# Etherdreams reports
|
||||
# ipconn is initial newdac to its etherdream
|
||||
lstt_ipconn = [[-1], [-1], [-1], [-1]]
|
||||
# dacstt is dac light engine state
|
||||
lstt_dacstt = [[-1], [-1], [-1], [-1]]
|
||||
# store last dac answers : ACK, not ACK,...
|
||||
# store last dac answers : ACK, not ACK,...
|
||||
lstt_dacanswers = [[-1], [-1], [-1], [-1]]
|
||||
# store last number of points sent to etherdreams buffer
|
||||
# store last number of points sent to etherdreams buffer
|
||||
lstt_points = [[0], [0], [0], [0]]
|
||||
|
||||
swapX = [1,1,1,-1]
|
||||
@ -94,7 +93,7 @@ swapY = [1,1,1,-1]
|
||||
lsteps = [[],[],[],[]]
|
||||
|
||||
# For glitch art : change position and number of points added by tracer.py
|
||||
# shortline is for distance with next point, shorter than 4000 (in etherdream coordinates)
|
||||
# shortline is for distance with next point, shorter than 4000 (in etherdream coordinates)
|
||||
# i.e (0.25,3) means add 3 points at 25% on the line.
|
||||
stepshortline = [(1.0, 8)]
|
||||
stepslongline = [(0.25, 3), (0.75, 3), (1.0, 10)]
|
||||
@ -115,7 +114,7 @@ knob = [0] * 33
|
||||
cc[21]=60
|
||||
viewer_distance = cc[21] * 8
|
||||
|
||||
# fov (cc 22)
|
||||
# fov (cc 22)
|
||||
cc[22]= 60
|
||||
fov = 4 * cc[22]
|
||||
|
||||
@ -131,7 +130,7 @@ nozoport=8001 #nozosc.py sending port to LJay (main.py)
|
||||
nozuport=0 #linux serial usb port connecting nozoid devices ACM0 by default
|
||||
|
||||
|
||||
angleX = 0
|
||||
angleX = 0
|
||||
angleY = 0
|
||||
angleZ = 0
|
||||
|
||||
|
||||
@ -16,7 +16,7 @@ import ast
|
||||
import numpy as np
|
||||
|
||||
|
||||
def Write():
|
||||
def Write():
|
||||
|
||||
config.set('General', 'lasernumber', str(gstt.LaserNumber))
|
||||
config.set('General', 'rediserverip', str(gstt.RediServerIP))
|
||||
@ -32,8 +32,6 @@ def Write():
|
||||
config.set(laser, 'ip', str(gstt.lasersIPS[i]))
|
||||
config.set(laser, 'type', str(gstt.lasertype[i]))
|
||||
config.set(laser, 'dac_family', str(gstt.dacfamily[i]))
|
||||
if gstt.dacfamily[i] == "extern_cmd":
|
||||
config.set(laser, 'cmd', str(gstt.cmd[i]))
|
||||
config.set(laser, 'kpps', str(gstt.kpps[i]))
|
||||
config.set(laser, 'intens', str(gstt.intens[i]))
|
||||
config.set(laser, 'red', str(gstt.red[i]))
|
||||
@ -53,8 +51,8 @@ def Write():
|
||||
|
||||
|
||||
|
||||
def Read():
|
||||
|
||||
def Read():
|
||||
|
||||
gstt.LaserNumber = config.getint('General', 'lasernumber')
|
||||
gstt.RediServerIP= config.get('General', 'rediserverip')
|
||||
gstt.wwwIP= config.get('General', 'wwwip')
|
||||
@ -71,8 +69,6 @@ def Read():
|
||||
gstt.lasersIPS[i]= config.get(laser, 'ip')
|
||||
gstt.lasertype[i]= config.get(laser, 'type')
|
||||
gstt.dacfamily[i] = config.get(laser, 'dac_family')
|
||||
if gstt.dacfamily[i] == "extern_cmd":
|
||||
gstt.cmd[i] = config.get(laser, 'cmd')
|
||||
gstt.kpps[i] = config.getint(laser, 'kpps')
|
||||
gstt.intens[i] = config.getfloat(laser, 'intens')
|
||||
gstt.red[i] = config.getint(laser, 'red')
|
||||
@ -94,3 +90,4 @@ def Read():
|
||||
|
||||
config = configparser.ConfigParser()
|
||||
config.read(gstt.ConfigName)
|
||||
|
||||
|
||||
220
main.py
220
main.py
@ -11,14 +11,14 @@ Laser server + webUI servers (ws + OSC)
|
||||
|
||||
- get point list to draw : /pl/lasernumber
|
||||
- for report /lstt/lasernumber /lack/lasernumber /cap/lasernumber
|
||||
- a nice ws debug tool : websocat
|
||||
- a "plugin" is a generator that send points to LJ. Plugins if they have an open OSC port can be checked and restart if in the same computer.
|
||||
- a nice ws debug tool : websocat
|
||||
- a "plugin" is a generator that send points to LJ. Plugins if they have an open OSC port can be checked and restart if in the same computer.
|
||||
|
||||
|
||||
All used ports:
|
||||
All used ports:
|
||||
|
||||
8002 OSC incoming
|
||||
9001 Websocket communication with WebGUI
|
||||
9001 Websocket communication with WebGUI
|
||||
Plugins OSC Ports (see LJ.conf)
|
||||
|
||||
'''
|
||||
@ -52,14 +52,14 @@ settings.Write()
|
||||
from multiprocessing import Process, set_start_method
|
||||
import random, ast
|
||||
from libs3 import plugins
|
||||
#from libs3 import lasytracer as tracer
|
||||
from libs3 import tracer3 as tracer
|
||||
#from libs3 import niptracer3 as tracer
|
||||
#from libs3 import lasytracer as tracer
|
||||
from libs3 import tracer3 as tracer
|
||||
#from libs3 import niptracer3 as tracer
|
||||
from libs3 import homographyp, commands, font1
|
||||
#import subprocess
|
||||
import os
|
||||
#from libs3 import midi3
|
||||
from libs3 import OSC3
|
||||
from libs3 import OSC3
|
||||
from websocket_server import WebsocketServer
|
||||
#import socket
|
||||
import types, _thread, time
|
||||
@ -82,6 +82,7 @@ elif os_name == "Darwin": # macOS
|
||||
elif os_name == "Linux":
|
||||
print("Plateform: Linux")
|
||||
|
||||
|
||||
def dac_process(number, pl):
|
||||
|
||||
import sys
|
||||
@ -89,7 +90,6 @@ def dac_process(number, pl):
|
||||
|
||||
print("Starting dac process", number)
|
||||
|
||||
|
||||
while True:
|
||||
try:
|
||||
d = tracer.DAC(number,pl)
|
||||
@ -110,20 +110,20 @@ def dac_process(number, pl):
|
||||
|
||||
except KeyboardInterrupt:
|
||||
sys.exit(0)
|
||||
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Init variables
|
||||
#
|
||||
|
||||
debug = gstt.debug
|
||||
debug = gstt.debug
|
||||
print("Debug :", debug)
|
||||
|
||||
print("Start Scene number :",gstt.SceneNumber)
|
||||
print("Laser feedbacks resetting...")
|
||||
for laserid in range(0,gstt.LaserNumber):
|
||||
|
||||
|
||||
r.set('/lack/'+str(laserid),64)
|
||||
r.set('/lstt/'+str(laserid),64)
|
||||
r.set('/cap/'+str(laserid),0)
|
||||
@ -156,13 +156,13 @@ import socket
|
||||
# oscserver
|
||||
oscserverIP = gstt.oscIPin
|
||||
|
||||
# OSC Server : accept OSC message on port 8002
|
||||
# OSC Server : accept OSC message on port 8002
|
||||
#oscIPin = "192.168.1.10"s
|
||||
oscserverIPin = serverIP
|
||||
oscserverPORTin = 8002
|
||||
|
||||
# OSC Client : to send OSC message to an IP port 8001
|
||||
oscserverIPout = oscserverIP
|
||||
oscserverIPout = oscserverIP
|
||||
oscserverPORTout = 8101
|
||||
|
||||
oscserver = OSC3.OSCServer( (oscserverIPin, oscserverPORTin) )
|
||||
@ -200,7 +200,7 @@ def handler(path, tags, args, source):
|
||||
commands.handler(oscpath,args)
|
||||
|
||||
|
||||
# RAW OSC Frame available ?
|
||||
# RAW OSC Frame available ?
|
||||
def osc_frame():
|
||||
#print 'oscframe'
|
||||
# clear timed_out flag
|
||||
@ -213,7 +213,7 @@ def PingAll():
|
||||
|
||||
if gstt.debug > 0:
|
||||
print("Pinging all plugins...")
|
||||
|
||||
|
||||
for plugin in list(gstt.plugins.keys()):
|
||||
if gstt.debug > 0:
|
||||
print("pinging", plugin)
|
||||
@ -223,28 +223,28 @@ def PingAll():
|
||||
|
||||
'''
|
||||
gstt.lasertype[i
|
||||
gstt.sizeX[i] =
|
||||
gstt.sizeY[i] =
|
||||
gstt.sizeX[i] =
|
||||
gstt.sizeY[i] =
|
||||
'''
|
||||
'''
|
||||
# OSC UI feedback
|
||||
def sendOSCUI(oscaddress,oscargs=''):
|
||||
|
||||
|
||||
if gstt.TouchOSCUI == True:
|
||||
oscmsg = OSC3.OSCMessage()
|
||||
oscmsg.setAddress(oscaddress)
|
||||
oscmsg.append(oscargs)
|
||||
|
||||
|
||||
oscui = OSC3.OSCClient()
|
||||
oscui.connect((gstt.TouchOSCIP, 8001))
|
||||
oscui.connect((gstt.TouchOSCIP, 8001))
|
||||
print("main sending OSC UI message :", oscmsg, "to", gstt.TouchOSCIP, ":8001")
|
||||
if gstt.debug >0:
|
||||
print("main sending OSC UI message :", oscmsg, "to", gstt.TouchOSCIP, ":8001")
|
||||
|
||||
|
||||
try:
|
||||
oscui.sendto(oscmsg, (gstt.TouchOSCIP, 8001))
|
||||
oscmsg.clearData()
|
||||
|
||||
|
||||
except:
|
||||
print ('Connection to OSC UI refused : died ?')
|
||||
pass
|
||||
@ -276,7 +276,7 @@ def osc_thread():
|
||||
|
||||
if lstt == "2": # Dac PLAYING (2) -> led is green (1)
|
||||
sendWSall("/lstt/" + str(laserid) + " 1")
|
||||
|
||||
|
||||
|
||||
ackstate = {'61': 'ACK', '46': 'FULL', '49': "INVALID", '21': 'STOP', '64': "NOCONNECTION ?", '35': "NOCONNECTION ?" , '97': 'ACK', '70': 'FULL', '73': "INVALID", '33': 'STOP', '100': "NOCONNECTION", '48': "NOCONNECTION", 'a': 'ACK', 'F': 'FULL', 'I': "INVALID", '!': 'STOP', 'd': "NOCONNECTION", '0': "NOCONNECTION"}
|
||||
lack= r.get('/lack/'+str(laserid)).decode('ascii')
|
||||
@ -293,13 +293,13 @@ def osc_thread():
|
||||
if chr(int(lack)) == 'I': # Dac sent INVALID ("I") -> led is yellow (4)
|
||||
sendWSall("/lack/" + str(laserid)+" 4")
|
||||
#print lack
|
||||
|
||||
|
||||
if lack == "64" or lack =="35": # no connection to dac -> leds are red (6)
|
||||
sendWSall("/lack/" + str(laserid) + " 6")
|
||||
sendWSall("/lstt/" + str(laserid) + " 6")
|
||||
#sendWSall("/lstt/" + str(laserid) + " 0")
|
||||
sendWSall("/lack/" + str(laserid) + " 6")
|
||||
sendWSall("/lstt/" + str(laserid) + " 6")
|
||||
#sendWSall("/lstt/" + str(laserid) + " 0")
|
||||
sendWSall("/points/" + str(laserid) + " 6")
|
||||
|
||||
|
||||
else:
|
||||
# last number of points sent to etherdream buffer
|
||||
sendWSall("/points/" + str(laserid) + " " + str(r.get('/cap/'+str(laserid)).decode('ascii')))
|
||||
@ -322,17 +322,17 @@ def osc_thread():
|
||||
|
||||
#
|
||||
# Websocket part
|
||||
#
|
||||
#
|
||||
def get_Host_name_IP():
|
||||
try:
|
||||
host_name = "localhost" #socket.gethostname()
|
||||
host_name = socket.gethostname()
|
||||
host_ip = socket.gethostbyname(host_name)
|
||||
print("Hostname : ", host_name)
|
||||
print("IP : ", host_ip)
|
||||
except:
|
||||
print("Unable to get Hostname and IP")
|
||||
return host_ip
|
||||
|
||||
|
||||
# Called for every WS client connecting (after handshake)
|
||||
def new_client(client, wserver):
|
||||
|
||||
@ -340,7 +340,7 @@ def new_client(client, wserver):
|
||||
sendWSall("/status Hello " + str(client['id']))
|
||||
#commands.sendOSCUI("/status", "Hello " + str(client['id']))
|
||||
|
||||
for laserid in range(0,gstt.LaserNumber):
|
||||
for laserid in range(0,gstt.LaserNumber):
|
||||
|
||||
sendWSall("/ip/" + str(laserid) + " " + str(gstt.lasersIPS[laserid]))
|
||||
sendWSall("/kpps/" + str(laserid)+ " " + str(gstt.kpps[laserid]))
|
||||
@ -348,8 +348,8 @@ def new_client(client, wserver):
|
||||
sendWSall("/laser "+str(laserid))
|
||||
#print("/laser "+str(laserid))
|
||||
sendWSall("/lack/" + str(laserid) + " 6")
|
||||
#print("/lack/" + str(laserid) + " 6")
|
||||
sendWSall("/lstt/" + str(laserid) + " 6")
|
||||
#print("/lack/" + str(laserid) + " 6")
|
||||
sendWSall("/lstt/" + str(laserid) + " 6")
|
||||
#print("/lstt/" + str(laserid) + " 6")
|
||||
sendWSall("/points/" + str(laserid) + " 0")
|
||||
#print("/points/" + str(laserid) + " 0")
|
||||
@ -379,25 +379,25 @@ def client_left(client, wserver):
|
||||
def message_received(client, wserver, message):
|
||||
|
||||
#if len(message) > 200:
|
||||
# message = message[:200]+'..'
|
||||
# message = message[:200]+'..'
|
||||
|
||||
#if gstt.debug >0:
|
||||
# print ("")
|
||||
# print("WS Client(%d) said: %s" % (client['id'], message))
|
||||
|
||||
|
||||
oscpath = message.split(" ")
|
||||
#print "WS Client", client['id'], "said :", message, "splitted in an oscpath :", oscpath
|
||||
if gstt.debug > 0:
|
||||
print("WS Client", client['id'], "said :", message, "splitted in an oscpath :", oscpath)
|
||||
|
||||
|
||||
PingAll()
|
||||
message4plugin = False
|
||||
|
||||
# WS received Message is for a plugin ?
|
||||
for plugin in list(gstt.plugins.keys()):
|
||||
|
||||
|
||||
if oscpath[0].find(plugin) != -1:
|
||||
|
||||
|
||||
message4plugin = True
|
||||
#print(oscpath)
|
||||
if plugins.Send(plugin, oscpath):
|
||||
@ -411,13 +411,13 @@ def message_received(client, wserver, message):
|
||||
if len(oscpath) == 1:
|
||||
args[0] = "noargs"
|
||||
#print "noargs command"
|
||||
|
||||
|
||||
elif len(oscpath) > 1:
|
||||
args[0] = str(oscpath[1])
|
||||
args[0] = str(oscpath[1])
|
||||
#print "arg",oscpath[1]
|
||||
|
||||
|
||||
commands.handler(oscpath[0].split("/"),args)
|
||||
|
||||
|
||||
|
||||
# if needed a loop back : WS Client -> server -> WS Client
|
||||
#sendWSall("ws"+message)
|
||||
@ -431,7 +431,7 @@ def sendWSall(message):
|
||||
#if gstt.debug >0:
|
||||
#print("WS sending %s" % (message))
|
||||
wserver.send_message_to_all(message)
|
||||
|
||||
|
||||
if gstt.TouchOSCUI == True:
|
||||
if message[:7] == '/status':
|
||||
print("Main WSall", message, message[:6])
|
||||
@ -440,8 +440,8 @@ def sendWSall(message):
|
||||
print("Main WSall", message, message[:6])
|
||||
commands.sendOSCUI('/line1', message[6:])
|
||||
|
||||
|
||||
'''
|
||||
|
||||
'''
|
||||
print ("")
|
||||
log.info("Midi Configuration...")
|
||||
midi3.check()
|
||||
@ -462,7 +462,7 @@ log.info("Creating startup point lists...")
|
||||
|
||||
if r.set("/clientkey","/pl/"+str(gstt.SceneNumber)+"/")==True:
|
||||
print("sent clientkey : /pl/"+str(gstt.SceneNumber)+"/")
|
||||
|
||||
|
||||
#pdb.set_trace()
|
||||
for sceneid in range(0,gstt.MaxScenes+1):
|
||||
print("Scene "+ str(sceneid))
|
||||
@ -480,32 +480,10 @@ for sceneid in range(0,gstt.MaxScenes+1):
|
||||
r.set('/order/'+str(laserid), 0)
|
||||
|
||||
|
||||
#
|
||||
# For tracer as external command
|
||||
#
|
||||
import subprocess
|
||||
import select
|
||||
def spawn(cmd):
|
||||
p = subprocess.Popen(cmd,
|
||||
shell=True,
|
||||
stdin=subprocess.DEVNULL,
|
||||
stdout=subprocess.DEVNULL,
|
||||
stderr=subprocess.DEVNULL)
|
||||
return p
|
||||
#
|
||||
# Starts one DAC process per requested Laser
|
||||
#
|
||||
|
||||
import signal
|
||||
import sys
|
||||
|
||||
def signal_handler(sig, frame):
|
||||
print('You pressed Ctrl+C!')
|
||||
commands.LJautokill()
|
||||
sys.exit(0)
|
||||
|
||||
signal.signal(signal.SIGINT, signal_handler)
|
||||
|
||||
if __name__ == '__main__':
|
||||
|
||||
# Bug in 3.8.4 MacOS default multiprocessing start method is spawn. Spawn doesn't work properly
|
||||
@ -517,55 +495,44 @@ if __name__ == '__main__':
|
||||
commands.DAChecks()
|
||||
print("dacs", gstt.dacs)
|
||||
|
||||
else:
|
||||
else:
|
||||
log.infog("Resquested DACs mode")
|
||||
|
||||
#lasernumber = gstt.LaserNumber -1
|
||||
lasernumber = gstt.LaserNumber -1
|
||||
print("LaserNumber = ", gstt.LaserNumber)
|
||||
log.info("Starting "+str(gstt.LaserNumber) + " DACs process...")
|
||||
|
||||
commands.workers = []
|
||||
for lasernumber in range(0,gstt.LaserNumber):
|
||||
# Launch one process (a tracer3 instance) by laser
|
||||
if gstt.dacfamily[lasernumber] == "extern_cmd":
|
||||
dac_worker = spawn(gstt.cmd[lasernumber])
|
||||
dac_worker.name = f'ExternCmd{lasernumber}'
|
||||
dac_worker.join = dac_worker.wait
|
||||
else:
|
||||
dac_worker= Process(target=dac_process, args=(lasernumber,0,))
|
||||
dac_worker.start()
|
||||
|
||||
#commands.worker0 = dac_worker0 # ???
|
||||
commands.workers.append(dac_worker)
|
||||
print(f"Tracer {lasernumber} : name", dac_worker.name , "pid", dac_worker.pid )
|
||||
print("DAC Family:", gstt.dacfamily[lasernumber]);
|
||||
|
||||
# if lasernumber >0:
|
||||
|
||||
# dac_worker1= Process(target=dac_process, args=(1,0,))
|
||||
# commands.worker1 = dac_worker1
|
||||
# print("Tracer 1 : name", dac_worker1.name , "pid", dac_worker1.pid )
|
||||
# dac_worker1.start()
|
||||
|
||||
# if lasernumber >1:
|
||||
# dac_worker2= Process(target=dac_process, args=(2,0,))
|
||||
# dac_worker2.start()
|
||||
# commands.worker2 = dac_worker2
|
||||
# print("Tracer 2 : name", dac_worker2.name , "pid", dac_worker2.pid )
|
||||
|
||||
# if lasernumber >2:
|
||||
# dac_worker3= Process(target=dac_process, args=(3,0,))
|
||||
# print("Tracer 3 : name", dac_worker3.name , "pid", dac_worker3.pid )
|
||||
# commands.worker3 = dac_worker3
|
||||
# dac_worker3.start()
|
||||
|
||||
# Launch one process (a tracer3 instance) by laser
|
||||
dac_worker0= Process(target=dac_process, args=(0,0,))
|
||||
dac_worker0.start()
|
||||
commands.worker0 = dac_worker0
|
||||
print("Tracer 0 : name", dac_worker0.name , "pid", dac_worker0.pid )
|
||||
|
||||
if lasernumber >0:
|
||||
dac_worker1= Process(target=dac_process, args=(1,0,))
|
||||
commands.worker1 = dac_worker1
|
||||
print("Tracer 1 : name", dac_worker1.name , "pid", dac_worker1.pid )
|
||||
dac_worker1.start()
|
||||
|
||||
if lasernumber >1:
|
||||
dac_worker2= Process(target=dac_process, args=(2,0,))
|
||||
dac_worker2.start()
|
||||
commands.worker2 = dac_worker2
|
||||
print("Tracer 2 : name", dac_worker2.name , "pid", dac_worker2.pid )
|
||||
|
||||
if lasernumber >2:
|
||||
dac_worker3= Process(target=dac_process, args=(3,0,))
|
||||
print("Tracer 3 : name", dac_worker3.name , "pid", dac_worker3.pid )
|
||||
commands.worker3 = dac_worker3
|
||||
dac_worker3.start()
|
||||
print("")
|
||||
|
||||
|
||||
#
|
||||
# start WS and OSC servers
|
||||
#
|
||||
|
||||
|
||||
try:
|
||||
|
||||
|
||||
log.info("Starting servers...")
|
||||
hostIP= get_Host_name_IP()
|
||||
if hostIP != gstt.wwwIP:
|
||||
@ -575,8 +542,8 @@ if __name__ == '__main__':
|
||||
print("python3 configure.py")
|
||||
log.err('Exiting...')
|
||||
#gstt.wwwIP = hostIP
|
||||
#commands.LJautokill()
|
||||
#sys.exit()
|
||||
commands.LJautokill()
|
||||
sys.exit()
|
||||
|
||||
# Launch OSC thread listening to oscserver
|
||||
print("OSC server to receive messages (UI,...)")
|
||||
@ -592,13 +559,13 @@ if __name__ == '__main__':
|
||||
#print()
|
||||
# Websocket listening port
|
||||
print("WebUI WS server...")
|
||||
|
||||
|
||||
#hostIP= get_Host_name_IP()
|
||||
if hostIP != gstt.wwwIP:
|
||||
log.err("wwwIP in config is not set to "+str(hostIP))
|
||||
gstt.wwwIP = hostIP
|
||||
#commands.LJautokill()
|
||||
|
||||
|
||||
print("binded at", gstt.wwwIP, "port",str(gstt.wsPORT))
|
||||
wserver = WebsocketServer(gstt.wsPORT,host= gstt.wwwIP)
|
||||
plugins.Init(wserver)
|
||||
@ -608,40 +575,43 @@ if __name__ == '__main__':
|
||||
|
||||
print("")
|
||||
log.info("Resetting all Homographies...")
|
||||
for laserid in range(0,gstt.LaserNumber):
|
||||
for laserid in range(0,gstt.LaserNumber):
|
||||
homographyp.newEDH(laserid)
|
||||
|
||||
|
||||
#midi3.check()
|
||||
# plugins autostart
|
||||
#print("")
|
||||
log.info("Plugins startup...")
|
||||
|
||||
|
||||
if gstt.autostart != "":
|
||||
|
||||
|
||||
for pluginname in gstt.autostart.split(","):
|
||||
print("Autostarting", pluginname, "...")
|
||||
plugins.Start(pluginname)
|
||||
|
||||
|
||||
print("")
|
||||
log.infog("LJ server running...")
|
||||
|
||||
|
||||
# websocket loop
|
||||
|
||||
wserver.run_forever()
|
||||
|
||||
|
||||
|
||||
|
||||
except Exception:
|
||||
log.err("Exception")
|
||||
traceback.print_exc()
|
||||
|
||||
|
||||
# Gently stop on CTRL C
|
||||
|
||||
|
||||
finally:
|
||||
|
||||
commands.LJautokill()
|
||||
|
||||
'''
|
||||
Some code previously used, for reference :
|
||||
|
||||
|
||||
random_points = [(300.0+random.randint(-100, 100), 200.0+random.randint(-100, 100), 0), (500.0+random.randint(-100, 100), 200.0+random.randint(-100, 100), 65280), (500.0+random.randint(-100, 100), 400.0+random.randint(-100, 100), 65280), (300.0+random.randint(-100, 100), 400.0+random.randint(-100, 100), 65280), (300.0+random.randint(-100, 100), 200.0+random.randint(-100, 100), 65280)]
|
||||
'''
|
||||
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user