From 5b5744c08925e62b9dc53dee1f64c352be86c3f4 Mon Sep 17 00:00:00 2001
From: jeanjack Adi <jeanjack@peco.re>
Date: Wed, 20 Nov 2019 21:13:47 +0100
Subject: [PATCH] Feux Piedthon Arduino + Daemon shell

---
 arduino.cpp        | 166 +++++++++++++++++++++++++++++++++++++++++++++
 mosquittoscript.sh |  14 ++++
 2 files changed, 180 insertions(+)
 create mode 100644 arduino.cpp
 create mode 100755 mosquittoscript.sh

diff --git a/arduino.cpp b/arduino.cpp
new file mode 100644
index 0000000..18f5a49
--- /dev/null
+++ b/arduino.cpp
@@ -0,0 +1,166 @@
+
+/***
+ * Fuz Piedthon
+ * Pedestrian traffic lights, green and red, controlled over MQTT
+ * Board:   ESP8266
+ *
+ */
+
+#include <Arduino.h>
+
+/// Pins configuration
+
+#define GPIO_VERT       14
+#define GPIO_ROUGE      16
+
+/// MQTT Config
+
+#define MQTT_SERVER      "sonic.fuz.re"
+#define MQTT_SERVERPORT  1883
+
+
+
+#include "WifiCredFuz.cpp"              // Wifi and MQTT Credentials
+/* with
+#define WLAN_SSID       ""
+#define WLAN_PASS       ""
+#define MQTT_USERNAME    "" //omg no user
+#define MQTT_KEY         "" //omg no key
+*/
+/// End of user config
+
+
+/// Wifi
+
+#include <ESP8266WiFi.h>
+
+WiFiClient client;
+
+void setupWifi() {
+
+    // Connect to WiFi access point.
+    Serial.print("Connecting to ");
+    Serial.println(WLAN_SSID);
+
+    WiFi.begin(WLAN_SSID, WLAN_PASS);
+    while (WiFi.status() != WL_CONNECTED) {
+        delay(500);
+        Serial.print(".");
+    }
+    Serial.println();
+
+    Serial.print("WiFi connected");
+    Serial.print(" IP address: ");
+    Serial.println(WiFi.localIP());
+
+}
+/// MQTT
+
+#include "Adafruit_MQTT.h"
+#include "Adafruit_MQTT_Client.h"
+
+
+/************ Global State (you don't need to change this!) ******************/
+
+// Setup the MQTT client class by passing in the WiFi client and MQTT server and login details.
+Adafruit_MQTT_Client mqtt(&client, MQTT_SERVER, MQTT_SERVERPORT, MQTT_USERNAME, MQTT_KEY);
+
+/****************************** Feeds ***************************************/
+
+// Setup a feed called 'pub_photocell' for publishing.
+Adafruit_MQTT_Publish pub_photocell = Adafruit_MQTT_Publish(&mqtt, "piedthon/debug");
+
+// Setup a feed called 'sub_piedthon' for subscribing to changes.
+Adafruit_MQTT_Subscribe sub_piedthon = Adafruit_MQTT_Subscribe(&mqtt, "piedthon/input");
+
+char *mqtt_message;
+
+
+// Function to connect and reconnect as necessary to the MQTT server.
+void MQTT_connect() {
+    int8_t ret;
+
+    // Stop if already connected.
+    if (mqtt.connected()) {
+        return;
+    }
+
+    Serial.print("Connecting to MQTT... ");
+
+    uint8_t retries = 3;
+    while ((ret = mqtt.connect()) != 0) { // connect will return 0 for connected
+        Serial.println(mqtt.connectErrorString(ret));
+        Serial.println("Retrying MQTT connection in 5 seconds...");
+        mqtt.disconnect();
+        delay(5000);  // wait 5 seconds
+        retries--;
+        if (retries == 0) {
+            // basically die and wait for WDT to reset me
+            Serial.println("Fail to connect to MQTT after 3 tries ... ");
+            return; // will recall the function
+        }
+    }
+    Serial.println("MQTT Connected!");
+}
+
+/// PiedThon
+
+void messageToPiedthon(char *msg) {
+
+    // Clignotement ? deux en même temps ?
+    switch (msg[0]) {
+        // LOW active le relay
+        case '0' : // Rouge et Vert
+            digitalWrite(GPIO_ROUGE, LOW);
+            digitalWrite(GPIO_VERT, LOW);
+            break;
+        case '1'​ : // ROUGE
+            digitalWrite(GPIO_VERT, HIGH);
+            digitalWrite(GPIO_ROUGE, LOW);
+            break;
+        case '2' : // VERT
+            digitalWrite(GPIO_VERT, LOW);
+            digitalWrite(GPIO_ROUGE, HIGH);
+            break;
+        case '3'​ : // Rien
+            digitalWrite(GPIO_ROUGE, HIGH);
+            digitalWrite(GPIO_VERT, HIGH);
+            break;
+    }
+}
+
+//// Bug workaround for Arduino 1.6.6, it seems to need a function declaration
+//// for some reason (only affects ESP8266, likely an arduino-builder bug).
+//void MQTT_connect();
+
+
+void setup() {
+
+    Serial.begin(115200);
+    delay(10);
+    Serial.println(F("Adafruit MQTT PiedThon remix"));
+
+    pinMode(GPIO_VERT, OUTPUT);
+    pinMode(GPIO_ROUGE, OUTPUT);
+
+    setupWifi();
+
+    // Setup MQTT subscription for onoff feed.
+    mqtt.subscribe(&sub_piedthon);
+}
+
+
+void loop() {
+
+    MQTT_connect();
+
+    Adafruit_MQTT_Subscribe *subscription;
+    while ((subscription = mqtt.readSubscription(5000))) {
+        if (subscription == &sub_piedthon) {
+            mqtt_message = (char *) sub_piedthon.lastread;
+            Serial.println("Got: "+String(mqtt_message));
+            messageToPiedthon(mqtt_message);
+        }
+    }
+}
+
diff --git a/mosquittoscript.sh b/mosquittoscript.sh
new file mode 100755
index 0000000..65fb4d1
--- /dev/null
+++ b/mosquittoscript.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+#
+# Démon pour jouer avec le feux piétong
+#####
+
+while(true);
+do
+	for i in `seq 1 3`
+	do
+		sleep 200
+		mosquitto_pub -h sonic -t "piedthon/input" -m "$i"
+	done
+done